Home - Return to Previous Page
Additional Images

Gates 47G4572 G Force CVT Drive Belt High Performance

Drive Belt

47G4572
Gates® G-Force™ continuously variable transmission (CVT) belts are the ultimate, high-tech component for transferring power on your smaller recreational power sports equipment. Gates designed G-Force™ belts with durability, simplicity, performance, and value in mind, then tested them under tough conditions in controlled environments. So, whether you’re loading up your UTV for a hard day’s work or off-roading on the road less traveled, Gates recreational belt drives and power transmission solutions continue to push the limits of what’s possible so you can, too.

  • Performance, durability, simplicity and value in extreme off-road environments.
  • Flexible, high-performance materials enable grab and go mobility and responsive acceleration.
  • Extended Life — shown to outlast other aftermarket belts by up to 5X.
  • Advanced aramid tensile cords and reinforced fiber loaded undercord for durability and dependability.

Break In Procedure
If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersports belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all. Follow these three steps to ensure the best performance and longest life from your G-Force™ belt.

1. Install the Right Belt. Using a belt that’s even slightly different than the OE specifications can affect performance - or stop you in your tracks.

2. Align and Clean. Align the clutches according to manufacturer specifications and clean the sheaves with a Scotch-Brite™ pad. Remove old belt residue, glazing, oils, and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER.

3. Install and Break It In. Perform two heat cycles (10-15 minutes each) at 80°F at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. If belt installation is at a temperature of 60°F or below, perform two heat cycles in 20 minutes at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.
Not Available
Pricing: $95.45

Application Detail

YearsMakeModelSubmodelNotes
2001 - 2001Polaris800LE
2001 - 2006PolarisClassic 600--
2001 - 2004PolarisClassic 600Touring
2001 - 2003PolarisClassic 700--
2003 - 2003PolarisClassic 700Touring
2004 - 2004PolarisClassic 800--
2003 - 2004PolarisClassic 800Touring
2014 - 2015PolarisIndy 600--
2014 - 2015PolarisIndy 600SP
2014 - 2015PolarisIndy 600SP LE
2014 - 2015PolarisIndy 600Voyager
2015 - 2015PolarisIndy 600Voyager 144in
2007 - 2007PolarisIQ 600HO
2007 - 2007PolarisIQ 600HO CFI
2007 - 2007PolarisIQ 600HO LX CFI
2001 - 2003PolarisPro X 440--
2002 - 2003PolarisPro X 440Fan
2001 - 2004PolarisPRO X 600--
2003 - 2004PolarisPro X 700--
2003 - 2003PolarisPRO X 800--
2004 - 2004PolarisPRO XR 800--
2002 - 2004PolarisRMK 600--
2003 - 2005PolarisRMK 600144in
2006 - 2006PolarisRMK 600HO
2003 - 2006PolarisRMK 700144in
2003 - 2006PolarisRMK 700151in
2008 - 2009PolarisRMK 700155in
2006 - 2006PolarisRMK 700159in
2002 - 2005PolarisRMK 800144in
2002 - 2005PolarisRMK 800151in
2002 - 2005PolarisRMK 800159in
2003 - 2003PolarisSKS 700--
2003 - 2003PolarisSKS 800--
2004 - 2005PolarisSwitchBack 600--
2007 - 2007PolarisSwitchBack 600HO
2007 - 2007PolarisSwitchBack 600HO CFI
2004 - 2005PolarisSwitchBack 800--
2005 - 2006PolarisTouring 600--
2005 - 2005PolarisTouring 800--
2000 - 2000PolarisXC SP 440--
2000 - 2005PolarisXC SP 600--
2005 - 2005PolarisXC SP 60050th Anniversary
2001 - 2005PolarisXC SP 700--
2001 - 2005PolarisXC SP 800--
1999 - 1999PolarisXCR SP 440--

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 15.0 lbs.
  • W6.0000” x H2.0000” x L9.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.